CADEANCO

bar1.jpg (2136 bytes)

IP67 Vibrating Wire Data Logger Specifications

 

PHYSICAL SPECIFICATIONS
 
Size: 160mm wide x 200mm high x 100mm deep
Weight: 3kg
Material: Powder-coated, die-cast aluminium
Sealing: IP67
Temperature:
Operating temperature    -20C to +55C
Storage temperature       -25C to +70C
ELECTRICAL SPECIFICATIONS
Power: Internal Battery: Sealed Lead Acid, 12V, 1.3Ah
240V Plug-pack Charger Module
Options: 10W Solar Charger
Extended Capacity External Battery
Primary Lithium Cell, 12V, 2Ah
Data Logging: Input Channels: Up to a maximum of 8
Storage Capacity: 5450 scans of vibrating wire data
(inc Time and Data information)
Data Backup: 10 years without primary power
Logger Timing: Real-time clock, non-volatile operation
10 year count without primary power
Scanning Intervals: 1 min, 10 min, 1 hour, 6 hour, 12 hour, 24 hour
Manual trigger mode via computer interface
Alarm Logging: Logging Control: Global enable/disable of all alarm functions
Scan Rate: Synchronous with data or 1 minute intervals
Trigger Level: Individual channel threshold value set by operator
Trigger Sensing: Threshold crossed in either [+ve] or [-ve] direction
Signal Mode: Set by operator to either Latched or Self-clear mode
Signal Outputs: Single external control line for external alarm module
SMS Alert option when a GSM Modem is fitted
Communications: Baud Rate: 9600 baud, 8 data, 1 start, 1 stop, no parity
Data Format: Data (f² units), Time, Date
Data Separator: Tab separated columns, text format
Data Recovery: Custom WINDOWS Interface software
Modem Options: Type: WAVECOM ASSAM2W 4-band GSM modem
Comms Rate: 9600 Baud,   Non-transparent mode
SIM Card: Micro-SIM
Type: NETCOMM IG6000 DC Industrial Grade PSTN
Comms Rate: ITU-T V.32 (9600bps)

As we are continually improving our products and processes, the information shown here is subject to change without notice.